Google+ sitemap

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Pacific Security Systems in Mumbai, India

XP95 Manual Call Point

The "XP95" Manual Call Point is compliant with EN54-11. The address of each call point is set at the commissioning stage by means of a seven segment DIL switch. The device features plug and play terminal connections and a resettable element. Plug and play terminal connections for fast wiring, Allow wiring continuity testing before fitting, Isolated version available, Reports an alarm in under 0.2 seconds Resettable element
XPERT CARD ADDRESSING
xpert card addressing
xpert card addressing

The XP95 Manual Call Point is compliant with EN54-11. The address of each call point is set at the commissioning stage by means of a seven segment DIL switch. The device features plug and play terminal connections and a resettable element.

A unique, patented addressing method provides simple, user friendly and accurate identification of detector location. A coded XPERT card (left) is inserted in the base. This can then be read by any XP95 (or Discovery) detector once it is plugged in. Using this method, all the electronic components are in the detector but the location information is held in the base. The XPERT card simplifies and speeds up installation and commissioning. Addressing errors during maintenance and service are eliminated.

The XP95 manual call points use DIL switch addressing, but the interrupt feature is extended to provide automatic reporting of call point location in the interrupt mode.

BLANK XPERT CARD
blank xpert card
A universal address card supplied with all bases. Using a coding guide, pips are removed to set the address of the inserted detector.
  • Simplifies and speeds up installation and commissioning
  • Uses patented, proven technology
  • Address remains the same, no matter how Often detectors are replaced
  • Flexibility to create any address
INTELLIGENT DUCT SMOKE DETECTOR
intelligent duct smoke detector
The Intelligent Duct Smoke Detector provides early detection of smoke in the air moving through heating and ventilation (HVAC) ducts in commercial and industrial premises. Its purpose is to prevent the re-circulation of smoke from an area on fire to areas unaffected by the fire.
  • Operates in air speeds of 0.5m/s to 20m/s
  • Transparent cover to view detector head LED
  • Integral smoke test port
ORBIS DUCT DETECTOR
The Orbis Duct Detector provides early detection of smoke in the air moving through heating and ventilation (HVAC) ducts.
  • Designed to accept an Orbis detector head
  • Used as supplementary detection
 
 
 
 
      | |