Google+ sitemap

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Pacific Security Systems in Mumbai, India
 

Honeywell Fire Alarm System

   
Heat Detector Repeater
Honeywell Fire Alarm Panel Addressable Manual
Call Point
Addressable Loop Sounders
Addressable Control Module Addressable Monitor Module  

Smoke Detector

 
Smoke Detector
smoke detector
 
The SD355 and SD355T addressable, low-profile plug-in photoelectric detectors use a state-of-the-art photoelectric sensing chamber with communications to provide open area protection and are used exclusively with Fire-Lite's MS-9200, MS-9200UD, and MS-9600 Addressable Fire Alarm Control Panels (FACPs). The SD355T adds thermal sensors that will alarm at a fixed temperature of 135°F (57°C). Since these detectors are addressable, they will help emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication. Remote LED anunciator capability is available as an optional accessory
Features
    SLC loop:
  • Two-wire loop connection.
  • Unit uses base for wiring.

    Addressing:
  • Addressable by device.
  • Direct Decade 01-99 (MS-9200, MS-9200UD) and 01-159 (MS-9600) entry of address.

    Architecture:
  • Unique single-source, dual-chamber design to respond quickly and dependably to a broad range of fires.
  • Sleek, low-profile design.
  • Integral communications and built-in type identification.
  • Built-in tamper-resistant feature.
  • Removable cover and insect-resistant screen for simple field cleaning.

    Operation:
  • Withstands air velocities up to 1,500 feet-per-minute (7.6 m/sec.) without triggering a false alarm.
  • Factory preset at 1.5% nominal sensitivity for panel alarm threshold level.
  • Visible LED "blinks" when the unit is addressed (communicating with the fire panel) and latches on in alarm.

    Mechanicals:
  • Sealed against back pressure.
  • Direct surface mounting or electrical box mounting.
  • Mounts to: single-gang box, 3.5" (8.89 cm) or 4.0" (10.16 cm) octagonal box, or 4.0" (10.16 cm) square electrical box (using a plaster ring-included).

 
 
 
      | |