Google+ sitemap

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Pacific Security Systems in Mumbai, India
 

Honeywell Fire Alarm System

   
Heat Detector Smoke Detector
Honeywell Fire Alarm Panel Addressable Manual Call
Point
Addressable Loop Sounders
Addressable Control Module Addressable Monitor Module  
 

Repeaters

 
Active Repeater
active repeater
 
The ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions. The ANN-80 and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply. ANN-80 is red; for white, order ANN-80-W.
Features
  • Backlit 80-character LCD display (20 characters x 4 lines).
  • Control switches for System Acknowledge, Signal Silence, Drill, and Reset.
  • Key switch enables/disables control switches and mechanically locks annunciator enclosure
  • Enclosure supervised for tamper.
  • Local sounder can be enabled or disabled at the FACP.
  • Displays device type identifiers, individual point alarm, trouble, supervisory, zone, and custom alpha labels.
  • Aesthetically pleasing design constructed of durable Lexan.
  • Backlight turns off during AC loss to conserve battery power but will turn back on if an alarm condition occurs.
  • Up to eight ANN-80s can be connected on the ANN-BUS.
 
 
 
      | |